Voltage Current Power Sensor Module, MRS150A INA260 DC 3.0V-36V Sensor Module with 8-Pin Plug for Voltage, Current and Power on the High or Low Voltage Side
Voltage Current Power Sensor Module, MRS150A INA260 DC 3.0V-36V Sensor Module with 8-Pin Plug for Voltage, Current and Power on the High or Low Voltage Side
Voltage Current Power Sensor Module, MRS150A INA260 DC 3.0V-36V Sensor Module with 8-Pin Plug for Voltage, Current and Power on the High or Low Voltage Side
Description: 1. It is compatible with 3V or 5V logic and can measure bus voltages up to +36VDC. Does not apply to AC voltage. 2. Most current meters have some obvious limitations in their operation that limit their use. Many are only on the low voltage side, which can cause problems when the ground reference changes with the current. Other devices (such as sister model INA219B) avoid this situation by measuring the high voltage side, but need to modify their shunt resistors to measure different current ranges. INA260 avoids these limitations and can be used with its built-in precision shunt resistor for continuous measurement of +36V and up to 15A currents on the high or low voltage side. Wow! 3. The voltage above the integrated 2 milliohm (0.002 ohm! ), 0.1% shunt resistance is measured by an internal 16-bit ADC, which allows impressive current range measurements with a resolution of 1.5 mA. The resistance of the resistance is so low that some multimeters record it as a short circuit 4. In the high-side configuration, bus voltage measurement and power calculation can be retrieved accurately, but advanced hackers who want to measure the bus voltage in the low-side configuration must cut off the jumper connecting V+ and VBUS and connect the VBUS pin to the voltage bus. Special feature: Ultra-high precision. High sensitivity. Ultra small volume. Easy to use. Parameters: Input voltage: DC 3.0V-36V. 2>.Measuring current: 36A (max.) Resolution ratio: 1.6 mA. Size: 23 x 23 mm. Package: 1 x INA260 Voltage, Current and Power Sensor Module 1 x 8 Pin Male
Product Features
- This distribution board is probably the last power sensor solution you need to buy. It can not only do the work of two multimeters, but also achieve amazing accuracy and flexibility. With it, you can measure DC current on the high or low voltage side as well as the bus voltage and have the power calculated automatically. It can complete these tasks with over 1% accuracy in an impressive range of voltage, current, and temperature while transferring data in a user-friendly format over I2C.
- It is compatible with 3V or 5V logic and can measure bus voltages up to +36VDC. Does not apply to AC voltage.
- The voltage above the integrated 2 milliohm (0.002 ohm! ), 0.1% shunt resistance is measured by an internal 16-bit ADC, which allows impressive current range measurements with a resolution of 1.5 mA. The resistance of the resistance is so low that some multimeters record it as a short circuit
- In the high-side configuration, bus voltage measurement and power calculation can be retrieved accurately, advanced hackers who want to measure the bus voltage in the low-side configuration must cut off the jumper between V+ and VBUS and connect the VBUS pin to the voltage bus.
- BUY WITH CONFIDENCE: In order to provide you with the highest quality service, please contact us if you have any questions. We offer you customer service until you are satisfied.
More Images
Voltage Current Power Sensor Module, MRS150A INA260 DC 3.0V-36V Sensor Module with 8-Pin Plug for Voltage, Current and Power on the High or Low Voltage Side
Voltage Current Power Sensor Module, MRS150A INA260 DC 3.0V-36V Sensor Module with 8-Pin Plug for Voltage, Current and Power on the High or Low Voltage Side
Description: 1. It is compatible with 3V or 5V logic and can measure bus voltages up to +36VDC. Does not apply to AC voltage. 2. Most current meters have some obvious limitations in their operation that limit their use. Many are only on the low voltage side, which can cause problems when the ground reference changes with the current. Other devices (such as sister model INA219B) avoid this situation by measuring the high voltage side, but need to modify their shunt resistors to measure different current ranges. INA260 avoids these limitations and can be used with its built-in precision shunt resistor for continuous measurement of +36V and up to 15A currents on the high or low voltage side. Wow! 3. The voltage above the integrated 2 milliohm (0.002 ohm! ), 0.1% shunt resistance is measured by an internal 16-bit ADC, which allows impressive current range measurements with a resolution of 1.5 mA. The resistance of the resistance is so low that some multimeters record it as a short circuit 4. In the high-side configuration, bus voltage measurement and power calculation can be retrieved accurately, but advanced hackers who want to measure the bus voltage in the low-side configuration must cut off the jumper connecting V+ and VBUS and connect the VBUS pin to the voltage bus. Special feature: Ultra-high precision. High sensitivity. Ultra small volume. Easy to use. Parameters: Input voltage: DC 3.0V-36V. 2>.Measuring current: 36A (max.) Resolution ratio: 1.6 mA. Size: 23 x 23 mm. Package: 1 x INA260 Voltage, Current and Power Sensor Module 1 x 8 Pin Male
Product Features
- This distribution board is probably the last power sensor solution you need to buy. It can not only do the work of two multimeters, but also achieve amazing accuracy and flexibility. With it, you can measure DC current on the high or low voltage side as well as the bus voltage and have the power calculated automatically. It can complete these tasks with over 1% accuracy in an impressive range of voltage, current, and temperature while transferring data in a user-friendly format over I2C.
- It is compatible with 3V or 5V logic and can measure bus voltages up to +36VDC. Does not apply to AC voltage.
- The voltage above the integrated 2 milliohm (0.002 ohm! ), 0.1% shunt resistance is measured by an internal 16-bit ADC, which allows impressive current range measurements with a resolution of 1.5 mA. The resistance of the resistance is so low that some multimeters record it as a short circuit
- In the high-side configuration, bus voltage measurement and power calculation can be retrieved accurately, advanced hackers who want to measure the bus voltage in the low-side configuration must cut off the jumper between V+ and VBUS and connect the VBUS pin to the voltage bus.
- BUY WITH CONFIDENCE: In order to provide you with the highest quality service, please contact us if you have any questions. We offer you customer service until you are satisfied.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Voltage Current Power Sensor Module, MRS150A INA260 DC 3.0V-36V Sensor Module with 8-Pin Plug for Voltage, Current and Power on the High or Low Voltage Side
Description: 1. It is compatible with 3V or 5V logic and can measure bus voltages up to +36VDC. Does not apply to AC voltage. 2. Most current meters have some obvious limitations in their operation that limit their use. Many are only on the low voltage side, which can cause problems when the ground reference changes with the current. Other devices (such as sister model INA219B) avoid this situation by measuring the high voltage side, but need to modify their shunt resistors to measure different current ranges. INA260 avoids these limitations and can be used with its built-in precision shunt resistor for continuous measurement of +36V and up to 15A currents on the high or low voltage side. Wow! 3. The voltage above the integrated 2 milliohm (0.002 ohm! ), 0.1% shunt resistance is measured by an internal 16-bit ADC, which allows impressive current range measurements with a resolution of 1.5 mA. The resistance of the resistance is so low that some multimeters record it as a short circuit 4. In the high-side configuration, bus voltage measurement and power calculation can be retrieved accurately, but advanced hackers who want to measure the bus voltage in the low-side configuration must cut off the jumper connecting V+ and VBUS and connect the VBUS pin to the voltage bus. Special feature: Ultra-high precision. High sensitivity. Ultra small volume. Easy to use. Parameters: Input voltage: DC 3.0V-36V. 2>.Measuring current: 36A (max.) Resolution ratio: 1.6 mA. Size: 23 x 23 mm. Package: 1 x INA260 Voltage, Current and Power Sensor Module 1 x 8 Pin Male
Product Features
- This distribution board is probably the last power sensor solution you need to buy. It can not only do the work of two multimeters, but also achieve amazing accuracy and flexibility. With it, you can measure DC current on the high or low voltage side as well as the bus voltage and have the power calculated automatically. It can complete these tasks with over 1% accuracy in an impressive range of voltage, current, and temperature while transferring data in a user-friendly format over I2C.
- It is compatible with 3V or 5V logic and can measure bus voltages up to +36VDC. Does not apply to AC voltage.
- The voltage above the integrated 2 milliohm (0.002 ohm! ), 0.1% shunt resistance is measured by an internal 16-bit ADC, which allows impressive current range measurements with a resolution of 1.5 mA. The resistance of the resistance is so low that some multimeters record it as a short circuit
- In the high-side configuration, bus voltage measurement and power calculation can be retrieved accurately, advanced hackers who want to measure the bus voltage in the low-side configuration must cut off the jumper between V+ and VBUS and connect the VBUS pin to the voltage bus.
- BUY WITH CONFIDENCE: In order to provide you with the highest quality service, please contact us if you have any questions. We offer you customer service until you are satisfied.
