BQLZR 350mm Diameter x 1mm Thickness Yellow Goat Skin Drums Head for 10 Inch African Tambourine Pack of 2
BQLZR 350mm Diameter x 1mm Thickness Yellow Goat Skin Drums Head for 10 Inch African Tambourine Pack of 2
BQLZR 350mm Diameter x 1mm Thickness Yellow Goat Skin Drums Head for 10 Inch African Tambourine Pack of 2
Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.Size: 350x1mm/13.78"x0.04" (DiaxT) 4.Suitable for 10-inch African tambourine. 5.High tensile strength, high fiber density and distinct three tones. 6. and easy to replace. Drum head replacement installation instructions: 1. After buying it, soak it in water for two hours. At this time, the drum head has softened before use. 2. Remove the original drum head, then take out the drum head that has been soaked in water, cover it in the middle to the top of the drum body, and then put the iron ring just removed from the drum head; then put the end of the drum head Turn it up, put the iron ring connected to the rope back to the top, and gradually pull the edge of the drum head upward from the middle of the two iron rings until all the edges of the drum head are turned up. 3. Braid the rope as it was originally, and gradually tighten the rope. When tightening the rope, be sure to adjust the two hoops on top to be parallel and not a side. 4. The rope is braided, the drum head is adjusted, and a simple slip knot is tied at the end of the rope. Then tighten the rope a second time. From the end of the rope to the end of the rope, use wooden sticks to tighten it in sequence. After tightening, tie the knot again and tie the rope. 5. After replacing the drum skin, let it dry for two days. After drying, trim off the excess drum skin, and then tune it before it can be used normally. Specifications: Color: Light Yellow Brand name: BQLZR Size: 350x1mm/13.78"x0.04" (DiaxT) Weight: 120 g Package include: 2 x Tambourine Drum Head
Product Features
- Size: 350x1mm/13.78"x0.04" (DiaxT)
- Suitable for 10-inch African tambourine.
- High tensile strength, high fiber density and distinct three tones.
- and easy to replace.
- Special note: This product is made of primary color goatskin, and the overall color ranges from black, yellow, spots, and milky white. High tensile strength, high fiber density and distinct three tones.
- Note: Due to the natural growth of sheepskin, the size and thickness of each sheet are different. Please allow slight errors. Thank you for your understanding.
Original: $97.56
-70%$97.56
$29.27More Images
BQLZR 350mm Diameter x 1mm Thickness Yellow Goat Skin Drums Head for 10 Inch African Tambourine Pack of 2
BQLZR 350mm Diameter x 1mm Thickness Yellow Goat Skin Drums Head for 10 Inch African Tambourine Pack of 2
Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.Size: 350x1mm/13.78"x0.04" (DiaxT) 4.Suitable for 10-inch African tambourine. 5.High tensile strength, high fiber density and distinct three tones. 6. and easy to replace. Drum head replacement installation instructions: 1. After buying it, soak it in water for two hours. At this time, the drum head has softened before use. 2. Remove the original drum head, then take out the drum head that has been soaked in water, cover it in the middle to the top of the drum body, and then put the iron ring just removed from the drum head; then put the end of the drum head Turn it up, put the iron ring connected to the rope back to the top, and gradually pull the edge of the drum head upward from the middle of the two iron rings until all the edges of the drum head are turned up. 3. Braid the rope as it was originally, and gradually tighten the rope. When tightening the rope, be sure to adjust the two hoops on top to be parallel and not a side. 4. The rope is braided, the drum head is adjusted, and a simple slip knot is tied at the end of the rope. Then tighten the rope a second time. From the end of the rope to the end of the rope, use wooden sticks to tighten it in sequence. After tightening, tie the knot again and tie the rope. 5. After replacing the drum skin, let it dry for two days. After drying, trim off the excess drum skin, and then tune it before it can be used normally. Specifications: Color: Light Yellow Brand name: BQLZR Size: 350x1mm/13.78"x0.04" (DiaxT) Weight: 120 g Package include: 2 x Tambourine Drum Head
Product Features
- Size: 350x1mm/13.78"x0.04" (DiaxT)
- Suitable for 10-inch African tambourine.
- High tensile strength, high fiber density and distinct three tones.
- and easy to replace.
- Special note: This product is made of primary color goatskin, and the overall color ranges from black, yellow, spots, and milky white. High tensile strength, high fiber density and distinct three tones.
- Note: Due to the natural growth of sheepskin, the size and thickness of each sheet are different. Please allow slight errors. Thank you for your understanding.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
BQLZR 350mm Diameter x 1mm Thickness Yellow Goat Skin Drums Head for 10 Inch African Tambourine Pack of 2
Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.Size: 350x1mm/13.78"x0.04" (DiaxT) 4.Suitable for 10-inch African tambourine. 5.High tensile strength, high fiber density and distinct three tones. 6. and easy to replace. Drum head replacement installation instructions: 1. After buying it, soak it in water for two hours. At this time, the drum head has softened before use. 2. Remove the original drum head, then take out the drum head that has been soaked in water, cover it in the middle to the top of the drum body, and then put the iron ring just removed from the drum head; then put the end of the drum head Turn it up, put the iron ring connected to the rope back to the top, and gradually pull the edge of the drum head upward from the middle of the two iron rings until all the edges of the drum head are turned up. 3. Braid the rope as it was originally, and gradually tighten the rope. When tightening the rope, be sure to adjust the two hoops on top to be parallel and not a side. 4. The rope is braided, the drum head is adjusted, and a simple slip knot is tied at the end of the rope. Then tighten the rope a second time. From the end of the rope to the end of the rope, use wooden sticks to tighten it in sequence. After tightening, tie the knot again and tie the rope. 5. After replacing the drum skin, let it dry for two days. After drying, trim off the excess drum skin, and then tune it before it can be used normally. Specifications: Color: Light Yellow Brand name: BQLZR Size: 350x1mm/13.78"x0.04" (DiaxT) Weight: 120 g Package include: 2 x Tambourine Drum Head
Product Features
- Size: 350x1mm/13.78"x0.04" (DiaxT)
- Suitable for 10-inch African tambourine.
- High tensile strength, high fiber density and distinct three tones.
- and easy to replace.
- Special note: This product is made of primary color goatskin, and the overall color ranges from black, yellow, spots, and milky white. High tensile strength, high fiber density and distinct three tones.
- Note: Due to the natural growth of sheepskin, the size and thickness of each sheet are different. Please allow slight errors. Thank you for your understanding.
